Monday, August 17, 2015

Working on sleds in August?

So unlike me, I usually wait until it gets cold, then I have to rust to get stuff done...

Anyway last winter I tore the engine on the Pantera all apart and then lost interest since it snowed so much. Now I'm back to working on the tin.


Initially I tried to cheat this and paint it a bunch of times with high build primer and that did take out some of the rust pits but it would have taken a year of painting and sanding so I finally mixed up a bunch of bondo and filled the pits giving the whole surface a thin coat. I knocked that back and it it with the high build to fill the scratches from the 100 grit sandpaper I was using. Bondo clogs sandpaper bad but 100 grit works better. I need to knock back the primer with some 320 grit in a block and then I think I can prime it one more time and paint. I'm not looking for perfection here but something way better than what I had.

Need to do the pipe while I'm at it but I've found that high temp paint needs a good clean surface to stick to. I did my '70 Ski-Doo pipe back years ago and it just flaked back off quick...