Stuff is still going on

Yeah the season is over, the snow is gone, the rains have come, well the rains SHOULD have come but haven't. That doesn't mean the sleds get neglected, or it SHOULDN'T mean the sleds get neglected...

Saturday I got some time to start putting the machines into storage, step one was to pull the windshield off the '91 Jag, the windshield comes off that sled easily so I pull it, otherwise the tarp will pull on it all summer and fold it in effectively ruining it. Then I added a couple ounces of Seafoam gas additive to the tank. I've been adding Seafoam at every fill up so this dose wasn't all that important, I also managed to run the tank down pretty far the last time I rode the sled so I didn't use very much.

Then I scrubbed the sled:

I used normal carwash soap and my normal car scrubbing sponge. This is a chance to give the sled a good check over, look for anything broken or needing attention. I found some cracks in the fiberglass of the hood but nothing too bad. The I fired it up and ran it around the yard to its summertime spot. I was very pleased in that it started right up no problem. That got the engine warm and helped dry out the hook and engine compartment. Then I waxed the hood and put two yogurt cups with mothballs in the footwells to keep the mice away.

There are a couple more steps, I need to stop and get a tarp for it, the canvas cover I have will get killed by staying outside all summer. Then I'll start it one more time and turn off the gas so the carb bowls empty out some. I'll shut it off before they run out, 2 stroke engines really don't like running out of gas. The bowls will still have some gas in them, theres nothing I can do about that but having them half empty will help to keep varnish from building up on the jets and causing trouble.

Finally I'll hose down the whole engine compartment with WD40. This gets rid of any remaining water and puts a water resistant coating on the metal parts. I did this last year on this sled and I was very pleased with the results. Its especially important since I don't have covered storage for the sleds although even if I did I think I'd still go ahead with it. I wish I'd been doing this on the Pantera, if I had I wouldn't need to repaint the tinwork...