No much happening but, the end of an era

So winter 2015-2016 is looking to be a washout. Probably to be expected really, we had 2 years of excellent snow, you can't count on greatness every year.

Obviously I haven't been doing much riding and having 7 sleds around doing nothing seems pretty absurd so last Saturday I finally said goodbye to an old friend, the 1995 Ski-Doo Grand Touring left the yard for the final time.

I accepted less money than I'd planned to but I still got better than 2/3 what I paid for the sled 7 years ago so I suppose I didn't come out too badly.

Friday I took the '91 Jag out for a spin, we'd gotten maybe 4" of snow and I just couldn't resist. The trails were rotten, the water holes had a skim of slush on them and were slippery as heck in the bottom, I had to keep hard on the gas to get through. The odo says I went 2.5 miles but I bet it was closer to 2 miles with half a mile of track slip. Still even a bad ride is better than no ride at all.

Finally I got the Wankel Panther going again. I'd gotten kind of disgusted with wrenching last winter and it was a challenge to get going again but I managed it. The change is nothing short of remarkable, the entire time I've owned it that sled was a challenge to run, I could never get it tuned well and it was just never happy. Once I got it back together and dealt with the fact that the gas line in the tank had melted it fired right up and ran pretty much perfectly. I think I could open the low needle just a little more but otherwise she's all set. I was so pleased I made a video:

Eventually I want to make a bunch of these where I show off the machine and take it for a ride, sort of like Jay Leno's garage but for snowmobiles.

Anyway, theres an update, we got another inch or two of snow last night so I reckon I'll get the '98 Jag out today and see what it can do. I've been fighting the carb on that one, it spits and dies. I think I had water in the gas so I finally bought an electric fuel siphon and drained the tank. With fresh gas it runs better but I think I need to go through the carb one more time. This summer I'll put a rubber glove on the gas cap in case its leaking...

A great ride!

Last week we got 10" of powder snow but I was in California so no riding for me. Then yesterday and last night we got another 10", this time its heavier stuff and there was some rain in between snows which makes for just perfect snow.

After lunch I dug out the big Ski-Doo and headed over to the local snowmobile shop, he's got a good trail in but had packed snow against the trail into a huge pile. I'm not usually the trailbreaker and didn't judge how the pile was built, ended up on a pile with one ski hanging out into space. If the pile hand't been built so strong I'd have rolled right over.

Its hard to tell in the pic but the top of the seat is 6' off the ground...

Managed to get the sled off the pile by tugging on the ski and turning the machine down hill instead of rolling it. Then it wouldn't start until I realized I'd hit the kill switch when I thought it was rolling over. Heading back out I did an X-Games style jump back over the pile and fell ass over teakettle as the sled landed funny. Fortunately it didn't take off without me.

The rest of the ride was pretty uneventful until on the return trip I lost the trail on a frozen pond where the wind had drifted the snow. Out in the 20" unpacked snow the sled tried to bog. I got way back on the seat and piled on the power. The sled has a 670cc liquid cooled 2 stroke which makes something like 90HP which is plenty for a 700# machine. With the weight shifted back and the power piled on the skis lifted and we made it across the pond no problem.

So anyway, my 4th good ride in 3 years, planning on another ride tomorrow.

What a rotten winter

But I'm still out there anyway. Yesterday we had a veritable heat wave, it got nearly up to 30...
I pulled the Polaris Cobra out of the garage for a little video, it started on the first pull which is very satisfying. I've always had a little trouble with this one flooding and I've gotten so gun shy on it that I start it with the gas turned off (I put an inline shutoff) and only turn the gas on after its running.

Then pulled the big Ski-Doo into the garage, got the alignment worked out finally. That took a lot more farting around than I'd expected. Step 1 was to lay at 2x4 along the track up past the ski and get the ski STRAIGHT. Then cant the tip out 1/4" which gives 1/2" total toe out as the Vintage Sleds guys said. There isn't enough snow to do any serious testing but a blast around the yard suggests it handles better.
While I was under the hood I noticed the battery hold down had broken, it was just a thin metal strap which hooked into a little slot, I welded an old computer slot cover onto the strap, had to cut it a little but it fit pretty well. Very ugly, but I shot some paint on, it should hold. Ideally I'd pull the gas tank and engine out and weld a nut onto the bulkhead for an automotive type hold down but that'd be a lot of work...
Farted around with the speedo a little, on the last ride it wasn't working. The cable is good and I can spin it with a drill to make the speedo go. I think it might have just come out of the drive a little, we'll see. I forgot to check as I rode around the yard.

Finally got the other carbide installed. That one I'd welded poorly and broke a weld. It took me 3 tries to get the stud welded on correctly, I just couldn't get it aligned straight. Sled steers very sharply now, this is something I'll want to keep up with in the future.

I'd bought new runners for the Polaris but it turns so well I didn't bother to install them. Still need to go back and put the other runner on the Pantera but I've had a cold and overdid it yesterday, need to take a day off.

Time for a change?

Now has finally returned to north central MA and as usual I'm caught completely flat footed. Fortunately the '78 Pantera fired up nicely yesterday, took a bunch of pulling but we got there. It needs the tinwork pulled to release a mouse nest but other than that no worries.

The big '95 Ski-Doo was a different story. I put the battery charger on it even though the charger said the battery wasn't taking charge, after sitting all summer the battery should have at least been a little flat, especially considering how little exercise its had for the last 2 years. After an hour I hit the key and the starter goes "thunk" but nothing else happens. I pulled the starter rope to ensure that the engine wasn't seized which it isn't but theres NO WAY I can start the big 670 with the rope. I feel like an 8 year old trying to start a 440cc...

Battery should be here...

So the battery is pooched, hardly a surprise its 5 years old. I headed down to the shop for the bad news, Randy says I'm in for $65 which isn't bad, $13/yr which puts a pretty positive spin on things.

However I've never really fallen in love with this machine, its huge, its heavy, I can't start it without the electric start. I think its time to move on. The boys hanging around the shop knew of a couple 440/500cc fan cooled 2up machines in the $1000 range. We refinanced the house this year so money is actually more available than it has been in the past. A quick look at Craigslist shows a bunch of machines in the $1500 range, some with reasonably low miles.

So I guess I'm in the market for a new machine:
370-500cc
Fan cooled
2up
Electric Start
Reverse

At this point in my life reverse is something I really like. I'm thinking 2up because then Angie can ride with me, I think 2up sleds also have a smoother ride just from being longer. That said I could give up on a 2up since Angie rides with me very infrequently and we've got extra machines so she could ride her own. I could also give up electric start if I had a machine I could pull over myself although I really like estart.

Finally I'd like something with a lot less throttle weight. The 670 is a wrist breaker. I spent some time last year lubing all the cables and it got a little better but its got 2 huge carbs with big springs, its never going to have an easy throttle. Apparently theres a throttle lightener which costs you some top end. I don't really care about top end but I've never been find one...

Still at little snow left

In theory I have 4 out of 5 snowmobiles in running condition so today I decided to get them all going and lined up. I started with the '71 Arctic Cat Panther (the Wankle Panther) and was delighted when it fired right up. In fact during a quick ride around the yard it went better than ever before. I'm kicking myself now for not taking this sled when I went riding a few weeks ago. Its relatively light and has a fairly long track, I think it would have handled the deep soft snow well.
Second was the '78 Arctic Cat Pantera, again an easy start and as usual I'm delighted with how the sled rides, this is definitely one of my all time favorite snowmobiles.
Next I tried the '79 Polaris Cobra. You might remember this one being a brat a few weeks ago, last night I pulled the plugs and had spark on both sides but something told me that just having spark was only part of the picture. Today that was proved out, while I have spark I don't think the PTO side is giving good fat spark like it should. After some farting around I got the machine to run but not well and it wouldn't pick up RPM. After running 30 seconds the MAG side cylinder is warm to the touch while the PTO side is cool. I predict some time with Deoxit in my future.

Finally I tried the '95 Ski Doo Grand Touring, I'd had this running back in October and then when we first got snow but it was sidelined from that first snow by holes in the exhaust. A long afternoon of welding fixed the exhaust but I temporarily lost interest in the sled being distracted by my vintage machines. Surprisingly this sled fired up with barely a touch of the key. One of my favorite things about Ski-Doos is the push/pull primer that makes getting them started a snap which is why I put one on the Wankle Panther.

I knew getting the sled started was only half the battle, as you can see in the picture it was still pretty well buried and after the fight with the Pantera I knew the Ski-Doo would be frozen to the ground. What I didn't realize is how BADLY it would be frozen to the ground. With the cooling and re-freezing cycles we've been having each of the skis is contained in a solid block of ice. I let the sled run and warm up while I grabbed a shovel and dug around some but finally gave up. I'll let nature do its work and thaw the skis out naturally.